SecuringNFS

Z KHnetWiki

Verze z 5. 12. 2015, 13:00; Ludvik (diskuse | příspěvky)
(rozdíl) ← Starší verze | zobrazit aktuální verzi (rozdíl) | Novější verze → (rozdíl)
Přejít na: navigace, hledání

Zdroj: https://wiki.debian.org/SecuringNFS

Notes on applying the suggestions from the [section] of the [[1]] to Debian 4.0 (Etch). These settings should still work with Debian 3.1 (Sarge).

http://www.tldp.org/HOWTO/NFS-HOWTO/security.html

Obsah

Firewalls

Firewall Friendly

When you set up a tight firewally, you go with the "deny all, allow some" paradigm. The SunRPC system was designed around the "trust the remote system" and the "make it simple for the admin, use dynamic ports" paradigm. Fortunatly, the services you use with NFS have port options to work better with your firewall.

The following examples are modifications to a Debian 3.1 (Sarge) (to Debian 6.0 (Squeeze) read comments at bottom of page) system with a 2.6 Linux kernel. In most cases they do not indicate the full contents of the files, just the parts that were modified.

It's easy to configure the port options for the statd, mountd and quotad RPC services, thanks to the use of /etc/default/* by the init-scripts

# /etc/default/nfs-common
STATDOPTS="--port 32765 --outgoing-port 32766"
# /etc/default/nfs-kernel-server
RPCMOUNTDOPTS="-p 32767"
# /etc/default/quota
RPCRQUOTADOPTS="-p 32769"

The nfs daemon (rpc.nfsd or just nfsd) will listen on port 2049 by default if no port is specified.

The change to /etc/services isn't necessary at all. It just helps produces a nice (sensible) output from netstat -tl on the NFS server.

# /etc/services
# NFS ports as per the NFS-HOWTO
# http://www.tldp.org/HOWTO/NFS-HOWTO/security.html#FIREWALLS
# Listing here does not mean they will bind to these ports. 
rpc.nfsd        2049/tcp                        # RPC nfsd
rpc.nfsd        2049/udp                        # RPC nfsd
rpc.nfs-cb      32764/tcp                       # RPC nfs callback
rpc.nfs-cb      32764/udp                       # RPC nfs callback
rpc.statd-bc    32765/tcp                       # RPC statd broadcast
rpc.statd-bc    32765/udp                       # RPC statd broadcast
rpc.statd       32766/tcp                       # RPC statd listen
rpc.statd       32766/udp                       # RPC statd listen
rpc.mountd      32767/tcp                       # RPC mountd
rpc.mountd      32767/udp                       # RPC mountd
rpc.lockd       32768/tcp                       # RPC lockd/nlockmgr
rpc.lockd       32768/udp                       # RPC lockd/nlockmgr
rpc.quotad      32769/tcp                       # RPC quotad
rpc.quotad      32769/udp                       # RPC quotad


I created /etc/modprobe.d/local.conf to provide the lockd module with options.

# /etc/modprobe.d/local.conf
options lockd nlm_udpport=32768 nlm_tcpport=32768
options nfs callback_tcpport=32764

Firewall Rules

Creating rules for your firewall for the above services should now be as simple as creating rules for more common services that bind to known ports, like http.

Shorewall

An example of allowing a firewall server make nfs mounts to an internal server. This rule set for the shorewall firewall allows traffic for portmap (111), nfs (2049). The mount program in Etch appears to prefer tcp connections to nfs and mountd, so we add tcp rules for all ports and ranges.

# Allow nfs mounts to local network
ACCEPT          fw      loc             udp     111
ACCEPT          fw      loc             tcp     111
ACCEPT          fw      loc             tcp     2049
ACCEPT          fw      loc             udp     2049
ACCEPT          fw      loc             tcp     32764:32769
ACCEPT          fw      loc             udp     32764:32769

Notes

Port numbers are just suggestions.

The ports listed above are just suggestions from the NFS-HOWTO. Listing here does not indicate that they are part of the [registry], nor is it the only suggestion. Chris Lowth has a different list of ports but the concept is mostly the same. I chose the NFS-HOWTO ports, just because it is a popular and highly visible document.

Because ports 32768 and 32769 are in the ephemeral ports range, output of {{{ss -l}}} won't include service names for these ports.

Who creates the port?

The man pages of individual RPC programs like {{{rpc.statd}}} and {{{rpc.portd}}} as well as online documentation like the NFS-HOWTO at tldp.org claim that the portmapper assigns the random port used.

Other documents on the web including a [NFS with firewalling forum topic] and [notes on Sun RPC numbers] state that portmap does not allocate ports. The services request the next available port from the kernel and then register their port with portmap.

It looks like some quick code checking and possible documentation patches are in order.

Error on Debian 6.0 (Squeeze)

By restarting this service below error occurs:

# /etc/init.d/nfs-kernel-server restart
Starting NFS kernel daemon: nfsdrpc.nfsd: unable to resolve ANYADDR:nfs to inet address: Servname not supported for ai_socktype
rpc.nfsd: unable to set any sockets for nfsd
failed!


This occurs because the nfs service is not defined in /etc/services to solve this problem simply add an entry for nfs in /etc/services as below:

# /etc/services
nfs     2049/tcp    # Network File System
nfs     2049/udp    # Network File System
Osobní nástroje